.site-header__logo-image { height: 45px; }

phantom hill ctf 1

Carry The Fire

Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device

The CTF2 architecture is modular. You can buy a CTF2 base and install illuminators to fit your needs. Use heads you already own, or buy new ones that fit your budget. The CTF2 will be offered in bundle packages with both IR and white light options.

Shopping Cart

Your cart is currently empty.

Enable cookies to use the shopping cart

Taxes and shipping calculated at checkout

  • Choosing a selection results in a full page refresh.
  • Press the space key then arrow keys to make a selection.

PHANTOM HILL CTF-1

I f you've ever tried wearing modern night vision goggles, you'll understand why they're often described as a superpower. Although it's not quite as impressive as flying like a speeding bullet or lifting a semitruck, the ability to see clearly, identify targets, and shoot accurately in a nearly pitch-black environment feels like an unfair advantage. However, like most superpowers, night vision comes with some inherent drawbacks. It requires a substantial amount of gear - for starters, you'll need a helmet, shroud, mount, and goggles or a monocular. The cost for these items adds up quickly and can easily exceed $5,000 or $10,000, and that's before you consider common accessories like helmet-mounted lights, strobes, battery packs, and ear protection. Refer to RECOIL OFFGRID Issue 43 for several in-depth articles explaining the basics of helmets and night vision systems.

Once you've done your research and chosen a night vision setup, the next item you'll need is a weapon-mounted infrared (IR) laser and illuminator.

The Challenges of Traditional Lights, Lasers, and Illuminators

Since IR light isn't visible to the naked eye, an IR laser and illuminator acts as a light source and aiming point that only you (and anyone else in the area wearing NVGS) can see. Typically, this will be paired with a separate weapon-mounted white light, which can be used in low-light and transitional environments where night vision isn't required. If you're thinking this sounds expensive, you're not wrong. It's easy to spend another $1,500 or more on a multifunction IR laser/illuminator unit such as a Steiner DBAL or L3-Harris ATPIAL-C, plus $300 or more on a quality white light.

This story is from the Issue 50 edition of OFFGRID.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,000+ magazines and newspapers.

Already a subscriber ?   Sign In

TO THE POINT OF IT

TO THE POINT OF IT

Crane TEC's Tempest Defensive Blade

WHO GOES THERE?

WHO GOES THERE?

Perimeter Defense Buyer's Guide

PHANTOM HILL CTF-1

PHANTOM HILL CTF-1

White Light, IR Laser, and IR Illuminator in a Compact and (Relatively) Inexpensive Package

WHAT IF?

You're in the Path of an Approaching Wildfire?

Smooth Moves

Smooth Moves

Full Spectrum Warrior's Combat Mobility System

Grand Odyssey

Grand Odyssey

A Fireman's Take on an Extended Outdoor Pack

Hollywood Survival School

Hollywood Survival School

Examining Which Films Focus on Practical Skills and Which Put Dramatic Effect Ahead of Reality

Disinfectants

Disinfectants

Learn What They Are and How to Make Your Own in an Emergency Situation

A HIGHER CALIBER

A HIGHER CALIBER

With Over 20 Years as a USMC Sniper and Police Officer in Los Angeles, Victor Lopez is in His Element Educating Others to Be More Effective in Austere Environments

Tailor-Made ARS: Parte

Tailor-Made ARS: Parte

The Jack-Of-All-Trades “General Purpose AR”

Overview: Phantom Hill CTF-1 Infrared Laser and Illuminator

Should you’ve ever tried sporting trendy night time imaginative and prescient goggles, you may perceive why they’re usually described as a superpower. Though it is not fairly as spectacular as flying like a rushing bullet or lifting a semi truck, the power to see clearly, determine targets, and shoot precisely in a nearly-pitch-black atmosphere looks like an unfair benefit. Nevertheless, like most superpowers, night time imaginative and prescient comes with some inherent drawbacks. It requires a considerable quantity of substances — for starters, you may want a helmet, shroud, mount, and goggles or a monocular. The price for this stuff provides up shortly and may simply exceed $5,000 or $10,000, and that is earlier than you think about frequent equipment like helmet-mounted lights, strobes, battery packs, and ear safety. Seek advice from OFFGRID Challenge 43 for a number of in-depth articles explaining the fundamentals of helmets and night time imaginative and prescient programs.

As soon as you have executed your analysis and chosen an evening imaginative and prescient setup, the subsequent merchandise you may want is a weapon-mounted infrared (IR) laser and illuminator.

The Challenges of Conventional Lights, Lasers, and Illuminators

Above: OFFGRID editor Tom Marshall wrote about two rifles he configured with conventional mild/laser/illuminator setups. The primary, seen right here, encompasses a Steiner DBAL-I2 IR laser flanked by a SureFire Scout mild with Vampire head that may swap between IR and white mild settings.

phantom hill ctf 1

Subscribe Right now and Save!

Since IR mild is not seen to the bare eye, an IR laser and illuminator acts as a lightweight supply and aiming level that solely you (and anybody else within the space sporting NVGs) can see. Sometimes, this can be paired with a separate weapon-mounted white mild, which can be utilized in low-light and transitional environments the place night time imaginative and prescient is not required. Should you’re considering that this sounds costly, you are not flawed. It is easy to spend one other $1,500 or extra on a multi-function IR laser/illuminator unit similar to a Steiner DBAL or L3-Harris ATPIAL-C, plus $300 or extra on a top quality white mild.

phantom hill ctf 1

Above: Tom Marshall’s second rifle encompasses a Holosun IR laser/illuminator and a white mild that includes components from Cloud Defensive and Valhalla Tactical. A pair of distant switches enable activation of every machine.

As if that is not sufficient, you may nonetheless have to determine how you can mount your white mild and IR laser/illuminator onto your rifle. Relying on every machine’s positioning and the way a lot rail area you need to work with, chances are you’ll want so as to add distant switches and route their wires fastidiously to maintain your setup organized. That is one other rabbit gap filled with multi-function switches, mounting adapters, and wire-routing equipment that add to the entire price of your setup.

As soon as you have spent the money and time to configure a rifle with a standard mild/laser/illuminator setup, the outcomes are actually rewarding. However for newcomers to the world of night time imaginative and prescient, this price and complexity will be discouraging. It has usually left us questioning why there is not an easier and extra inexpensive “turn-key” choice available on the market — Phantom Hill got down to present precisely that.

Phantom Hill CTF-1: An All-in-One Resolution

phantom hill ctf 1

You most likely have not heard of Phantom Hill — neither had we — however that does not imply it is a newcomer to this market. Phantom Hill has spent the final 14 years designing night time imaginative and prescient tools behind the scenes for a few of the greatest gamers within the business: Ops-Core, Gentex, S&S Precision, Princeton Tec, and Crye Precision, to call just a few. Solely lately did the corporate determine to launch its first product below its personal model title.

The Phantom Hill CTF-1 is described as “a easy instrument at a good value that may be put to speedy use with out the necessity for extra elements.” The MSRP for this unit is $799, a value that is roughly half that of the multi-function IR laser/illuminators we talked about earlier, to not point out the additional price of a separate white mild. This caught our consideration, so we requested a pattern to evaluation shortly after it was launched in late 2021.

phantom hill ctf 1

Above: Our pattern is marked as serial quantity 12, indicating simply how “sizzling off the press” it was.

Design and Performance

The CTF-1 covers all three of crucial features — white mild, infrared laser, and infrared illuminator — in a single compact unit.

phantom hill ctf 1

Above: We mounted the CTF-1 on this Aero Precision EPC 9mm AR pistol, which can be featured in a separate article quickly. It options components from Arbor Arms, Arisaka Protection, JK Armament, Major Arms, RISE Armament, Strike Industries. (Picture by Nate Gerhart)

At its core is a metallic housing with an unusual-looking uncooked end. This attribute comes from its Direct Metallic Laser Sintered (DMLS) aluminum development. DMLS is a 3D-printing approach that makes use of a laser to sinter (i.e. warmth and condense) metallic powder right into a stable construction. This expertise allowed Phantom Hill to maneuver shortly from a prototype part to a production-ready design, whereas avoiding costly tooling or molds that might drive up manufacturing prices. Phantom Hill says the tough sintered end has a secondary benefit — it reduces the IR reflectivity of the unit, due to this fact making it much less seen to different NV-equipped personnel.

The housing has an built-in Rail Grabber that locks onto a Picatinny rail utilizing a single cross-bolt with a Torx head. We discovered this mounting system to be very safe. It match three ARs we tried it on, however we suspect that its tight contours across the prime rail could make it incompatible with sure large-diameter handguards. Compatibility with non-AR platforms can be hit and miss at finest.

phantom hill ctf 1

The Phantom Hill CTF-1 makes use of a symmetrical design with a white mild on one aspect and an IR illuminator on the opposite. The white LED produces 380 lumens of impartial 5700K mild and tasks it in a smooth flood sample. That is splendid for close-quarters use and room-clearing, because it gives a large angle of visibility, but it surely would not have the ability or throw mandatory for long-range pictures outside. Should you’ve used a Streamlight TLR-7 pistol mild, it is similar to that.

As for the IR illuminator, its beam sample is basically the identical because the white LED. For individuals who just like the technical particulars, it options an 850nm wavelength and 1120 mW/sr output; for the remainder of us, it seems roughly as vibrant below a set of NV tubes because the white mild appears to be like to the bare eye.

The IR illuminator prompts concurrently with the 850nm IR laser, which is centered straight over the bore of the weapon. We can’t say that every one IR lasers are created equal, however civilian-legal Class 1 IR lasers are restricted by the U.S. Meals and Drug Administration (sure, the FDA regulates lasers) to a most output lower than 0.70mW. Because of this, most high-quality civilian-legal IR lasers can be calibrated to simply under this restrict, and can seem equally vibrant below regular use.

phantom hill ctf 1

Activation is easy, with two textured rubber buttons on prime of the unit. Every corresponds to its aspect of the housing; the left “VIS” button prompts the white mild, and the precise “IR” button prompts the IR illuminator and IR laser. Each are momentary-only, so you may have to press and maintain to maintain the ability on.

Not like many multi-function laser models, the CTF-1 does not have a visual laser in-built. This retains price and complexity down, but in addition means you may solely be capable to zero the laser below night time imaginative and prescient. If each activation buttons are pressed and held for 3 seconds, the unit goes into zeroing mode, and the IR laser activates constantly. It might probably then be adjusted through elevation and windage hex screws to match the weapon’s level of affect. Fortunately, its centered alignment meant we did not must do a lot adjustment after mounting it on our Aero Precision EPC 9mm AR.

phantom hill ctf 1

The CTF-1 is powered by two CR123 batteries, every sealed behind separate weatherproof caps behind the housing. Phantom Hill says the caps have a taper-fit design to make it simpler to reinstall them at the hours of darkness. Most run time is marketed at 3 hours.

Impressions on the Vary

We examined the Phantom Hill CTF-1 IR laser and illuminator side-by-side towards an AN/PEQ-15, which is the full-power military-spec model of an L3-Harris ATPIAL-C. The total-power PEQ-15 isn’t out there on the civilian market, however a brand new ATPIAL-C will run you roughly $1,350 — that is $550 greater than the CTF-1. It would not embrace a white mild, so consider just a few hundred extra for that if you happen to do not have already got one.

phantom hill ctf 1

Above: This picture, taken by way of an AGM International Imaginative and prescient white phosphor PVS-14, exhibits the CTF-1 IR laser and illuminator aimed toward a berm roughly 25 yards away. The one ambient lighting was some dim moonlight. 

phantom hill ctf 1

Above: These photographs present the CTF-1 beam subsequent to a PEQ-15 in “low” mode (left photograph) and “excessive” mode (proper photograph).

With the PEQ-15 on its civilian-legal “low” setting, the lasers seem similar, as we anticipated. The CTF’s illuminator seems far brighter than the PEQ’s, however the PEQ’s adjustable focus lens produces a way more concentrated beam with a tough edge. At distances nearer than 100 yards, we might give the CTF-1 a bonus, particularly in enclosed areas. Past 100 yards, the PEQ’s concentrated beam is superior.

With the PEQ-15 on the “excessive” setting, it positively outperforms the CTF-1, particularly contemplating its capacity to regulate the beam focus for various distances. The laser can be noticeably brighter, drawing a line that highlights mud particles within the air. Nevertheless, this output mode isn’t accessible to industrial ATPIAL-C models. Full-power PEQ-15s are solely out there to the army and legislation enforcement businesses, so it is not a good comparability. We included it as a degree of reference, for the reason that CTF-1 nonetheless carried out surprisingly properly compared.

Closing Ideas

phantom hill ctf 1

There are just a few drawbacks to the CTF-1. The centered laser makes it inconceivable to mount backup iron sights in entrance of the unit or apply it to something with a set entrance sight. The housing is tightly-contoured across the rail, which can make the unit incompatible with sure handguards (e.g. integrally-suppressed weapons). The activation buttons are positioned shut along with similar dimension and texture, so regardless of the small ridge between them, it is comparatively simple to fat-finger the flawed one. And the shortage of a visual laser makes zeroing extra of a problem.

That mentioned, the Phantom Hill CTF-1 gives spectacular worth at $800, and completely fulfills its said aim of serving as “a easy instrument at a good value that may be put to speedy use.” We discovered that it really works particularly properly for brief weapons with restricted handguard actual property, since there is not any want for a separate white mild, switches, or cable routing. The extensive beam sample for IR and VIS outputs additionally lends itself to those purposes. Whether or not you are simply getting began on the planet of night time imaginative and prescient otherwise you’re searching for a extra handy technique to convert certainly one of your ARs for NV use, the CTF-1 is an interesting choice, and we’re glad to see this market turning into extra various.

phantom hill ctf 1

We’ll go away you with a bit of fine information. Phantom Hill has introduced a second product referred to as the CTF-2, which can function an up to date 3-button activation system and compatibility with SureFire-style mild and illuminator heads (e.g. a SureFire Scout mild and a B.E. Meyers KIJI illuminator). Phantom Hill expects to launch this product round mid-2022.

For extra data on the Phantom Hill CTF-1 and future Phantom Hill merchandise, go to phantomhill.design or comply with @phantomhill.design on Instagram.

STAY SAFE: Obtain a Free copy of the OFFGRID Outbreak Challenge

In concern 12, Offgrid Journal took a tough have a look at what you have to be conscious of within the occasion of a viral outbreak. We’re now providing a free digital copy of the OffGrid Outbreak concern whenever you subscribe to the OffGrid electronic mail e-newsletter. Join and get your free digital copy Click on to Obtain!

phantom hill ctf 1

You may also like

phantom hill ctf 1

Phantom Hill Designs CTF-1: Redefining Entry Level IR Lasers

survival

Every day, behind the veil of bureaucracy, super-secret scientists invent new lights, lasers, and technology that could cause armageddon if it were to get into the hands of a non-government actor. Meanwhile, the tinkerers of the world work hard to build something more useful than an advanced mousetrap. The dichotomy that has existed between military and civilian night vision is tearing fast, meanwhile, Phantom Hill Designs is not waiting for daddy government to say we can have our NODs and Laser, too. By incorporating a visible/white light, IR laser, and IR illuminator into a single housing, all for under $800, the CTF-1 looks like it could redefine what a true entry-level night vision setup would look like.

Phantom Hill Designs CTF-1

At the end of the day, there’s no truly casual way to get into night vision. At the same time, items like the CTF-1 are pushing the cost of entry down to more attainable levels. Being night vision capable requires a functional ecosystem of gear starting with NODs but extending to the firearm as well. NODs, Mount, Helmet, Firearm, Suppressor, Optic, Light, Laser, and Illuminator quickly add up. And while we’ve seen some more affordable-but-performing options cover so many of these bases: from opting for a bump helmet instead of a ballistic one, to rolling with a Vortex Sparc SolAR instead of an Aimpoint T2 Micro, one necessary item has seen very few new options: the IR aiming device.

Phantom Hill Designs CTF-1

The Phantom Hill Designs CTF-1 combines a 380-lumen white light with an IR designator and IR LED flood/illuminator into a single unit that takes CR123 batteries. The housing sets it apart even further, being 3D sintered/printed out of aluminum, with integrated actuator switches: one for visible, one for IR. The laser can be zeroed, and adjusts with non-clicking set screws.

Phantom Hill Designs CTF-1

The two heads: one for IR, and one for white light, screw off to reveal LED bulbs. Rumor is future versions might accept Surefire, Modlite, or similar pattern heads, but we are unable to substantiate this at this time. Users can still swap out the lenses.

Phantom Hill Designs CTF-1

Since it uses an IR LED for the illuminator, it doesn’t throw a sharp, central cone, but rather a bloom that cools as it gets further from the center.

Keeping Up With the Concept

The Phantom Hill designs CTF-1 is not trying to replace the PEQ-15, nor undercut the DBAL, but provide a functional system that solves multiple needs. It aims to outperform pistol-style designators, without costing the $1,500 of a typical civilian laser. Does it accomplish this? Technically yes.

As unfair as it is, the standard for such systems is often driven by what is being fielded in the military. To compare a Surefire Mini Scout, and full-power PEQ-15, which easily can cost north of $4,000 altogether, not to mention the volatility of the secondary market, an $800 solution really doesn’t sound so bad. The release of the Phantom Hill CTF-1 couldn’t be more perfectly timed with the growing crowd of civilian night vision owners who are pioneering in their own right just what night-vision capable can mean.

Phantom Hill Designs CTF-1

The light, laser, and illuminator are best described as qualitatively adequate : they’re bright enough, crisp enough, and patterned to play their roles effectively. Quantitatively, others will out-perform the CTF-1, but not proportionally to the cost of entry.

Clearly designed to ride on an AR-15, the shape of the CTF-1 can’t go on just anything. The tubular sections that hold the batteries and LEDs ride lower than the attachment point for a profile closer to the rail. As a result, firearms without a raised top rail won’t accept it. Good thing the AR-15 isn’t going anywhere. For those outfitting a CZ Scorpion, the HB Industries rail works.

Phantom Hill Designs CTF-1

The buttons are surprisingly crisp in a world of mushy options. Although a small ridge divides them from each other, they are close enough together to raise concerns of hitting the wrong button in a pinch: exactly when you don’t want that to happen. In Special Operations circles, accidentally triggering your white light is treated like a negligent discharge of a firearm, and for good reason. Capping the white-light side, and spending some serious time with the Phantom Hill CTF-1 are highly recommended.

The left button activates the white light, the right activates both the light and the laser.

The sintered metal body differs from other lasers, as it tends to absorb light, or at least not reflect it as much. This matters very little in the daylight, but factors in at night, in the event that you’re not the only one seeing in the dark. Cameras that can pick up some of the IR spectra are still becoming more and more affordable: your camera doorbell and cell phone most likely stretch just a bit into it.

Carrying the Fire

Phantom Hill’s design does more than illuminate the darkness for those who can see in the dark. It signals and supports a growing interest in Night Vision gear from entrepreneurs and tinkerers. It is here in history when we typically see the sudden proliferation and improvement of technology, and we’re okay with that.

Phantom Hill Designs CTF-1

The CTF-1 carries its weight as a one-stop-shop for those who are aware of working with its nuances. It distinctly lacks the pompous bravado of saying that it’s “just as good” as military-grade counterparts, but instead brings a functional light, laser, and illuminator to the table in a single unit that runs on some of the most common batteries in the ecosystem. While on one hand, the CTF-1 solves a problem, on the other, it inspires future possibilities.

Phantom Hill Designs CTF-1

Weight: 9.9 ounces with batteries Length: 4.75 inches Height: 1.5 incches White Light: 380 lumens IR Laser: 850nm IR Illuminator: 850nm Batteries: 2x CR123 Battery Life: 3 hours MSRP: $800 URL: phantomhill.design

More on Night Vision

And on offgrid.

  • How to set up your Rifle for  Low-Light/No-Light Conditions .
  • Night Vision  101.
  • GBRS Group : Shadows that Bite.
  • Night Vision Helmet Setup  Guide.
  • Sionyx Aurora Pro : Color Night Vision Review.
  • S&S Precision : PlateFrames, Chest Rigs, and Illumination: More than Maritime Excellence.

Explore RECOILweb:

image

Augason Farms Deluxe 30-Day Emergency Food Supply, 200 Servings , Package/Color may vary

phantom hill ctf 1

Ready Hour, Emergency Meal Entrées, Real Non-Perishable Meals, 25-Year Shelf Life, Portable Flood-Safe Container, 120 Servings

phantom hill ctf 1

4Patriots: 4-Week Emergency Food Supply Survival Kit, Perfect for Camping, Freeze Dried Preparedness Food, Designed to Last 25 Years, Be Ready with 192 Servings of Delicious Breakfast, Lunch, & Dinner

phantom hill ctf 1

Ready Hour, Fruit & Veggie Mix, Real Non-Perishable Freeze-Dried Food, 30-Year Shelf Life, Portable Emergency and Adventure Food Supply, Durable Flood Safe Container, 56 Servings

phantom hill ctf 1

Grizzly Gear Emergency Food Rations- 3600 Calorie Blueberry Bar - 3 Day, 72 Hour Supply For Disaster, Hurricane, Flood Preparedness - Less Sugar, More Nutrients Than Leading Brands - 5 Year Shelf Life

phantom hill ctf 1

READYWISE - Emergency Food Supply, 124 Servings, 1 Bucket, Freeze-Dried, MRE, Pre-made, Survival and Adventure Essentials for Camping, Hiking & Emergencies, Individually Packaged, 25-Year Shelf Life

phantom hill ctf 1

The Wornick Company MRE 1 case of HDR U.S. Military Surplus Humanitarian Meals Ready to Eat, FEMA 10 pack/ 20

phantom hill ctf 1

READYWISE - Entrée Grab & Go Bucket, 60 Servings, Emergency, MRE Supply, Premade, Freeze Dried Survival Food for Hiking, Adventure & Camping Essentials, Individually Packaged, 25 Year Shelf Life

phantom hill ctf 1

READYWISE - 30 Day, Emergency Food Supply, 298 Servings, 2 Buckets, Freeze-Dried, MRE, Camping, Hiking, Survival, Adventure Meal, 25-Year Shelf Life

phantom hill ctf 1

Augason Farms Breakfast and Dinner Variety Pail Emergency Food Supply Everyday Meals 4 Gallon Pail

Insider look at ukrainian workshop where they are working on some of the captured russian vehicles, ukraine is salvaging russian tank machine guns, must see video – one of the most shocking “how” war videos we’ve seen from the invasion of ukraine, ukraine seeks security guarantees ‘stronger than nato’s,’ outlines other terms for peace deal with russia, powerful must-watch video from the bbc looking at russian propaganda about the azov regiment are they nazis, breaking: via defense intelligence of ukraine libraries of the temporarily occupied territories of luhansk, donetsk, chernihiv and sumy regions, the seizure of ukrainian historical..., democrat rep. gwen moore tries to introduce joe biden in milwaukee and he’s nowhere..., nearly a fourth of states introducing biometric digital ids — and more than half..., just in: hunter biden’s lead lawyer asks to withdraw from case after plea deal..., nyc restaurateur pulling out of hotel turned migrant shelter, how convenient: hawaii governor reveals state plans “to acquire land” ravaged by wildfires (video), wayne root: now it’s official. i know it, you know it. everyone knows it. trump’s georgia indictment is the final proof the 2020 election..., joe biden smirks as he ignores reporters asking for comment on rising death toll of maui wildfires (video), hft survival knife review, ganzo folding knives (part 3), 9 smart soda can survival hacks you need to know, how to make a double-wide cobra paracord bracelet, 4 ways to make camouflage at home, the mcnett tactical utility knife, benchmade 140 nimravus review, spartan armor armaply™ swimmers cut plate carrier review, links to check out.

  • Survival Food
  • MRE For Sale
  • Food Survival kits
  • Survival Kits
  • Bug Out Bag
  • News & Current Events 28281
  • Firearms 4885
  • Survival News & Info 2953
  • Survival 2015
  • Bushcraft & Survival Videos 772
  • Conservation 354
  • Gear Reviews & Testing 243
  • Medical 190
  • Food Prep & Storage 44
  • Food & Hydration 38
  • Ukraine Invasion 32
  • BushCraft 20
  • Homesteading 13
  • Outdoor Survival 12
  • Gathering 6
  • Land Navigation 6

Latest Articles

Handguns are the greatest ballistic threat that first responders face #bethedifference #bodyarmor, learn about left lateral chest placement for needle decompression #bethedifference #ars, shot show 2024 party list: networking events, parties, and meetups at shot, should you mix new gasoline with old, taser laws in michigan: legal or not.

Survival Magazine is a site for people interested in Survival & Prepper Information. We provide you with the latest breaking news and videos. Be sure to check out the incredible community and wealth of survival knowledge in our Survival & Prepping Prepper - SHTF Preparedness - Survival Blog - SHTF Blog - Off Grid Prepper Forums - Survival Forum

© Copyright -Survival Magazine

  • Advertising
  • Privacy Policy

World Energy

Rosatom Starts Production of Rare-Earth Magnets for Wind Power Generation

TVEL Fuel Company of Rosatom has started gradual localization of rare-earth magnets manufacturing for wind power plants generators. The first sets of magnets have been manufactured and shipped to the customer.

phantom hill ctf 1

In total, the contract between Elemash Magnit LLC (an enterprise of TVEL Fuel Company of Rosatom in Elektrostal, Moscow region) and Red Wind B.V. (a joint venture of NovaWind JSC and the Dutch company Lagerwey) foresees manufacturing and supply over 200 sets of magnets. One set is designed to produce one power generator.

“The project includes gradual localization of magnets manufacturing in Russia, decreasing dependence on imports. We consider production of magnets as a promising sector for TVEL’s metallurgical business development. In this regard, our company does have the relevant research and technological expertise for creation of Russia’s first large-scale full cycle production of permanent rare-earth magnets,” commented Natalia Nikipelova, President of TVEL JSC.

“NovaWind, as the nuclear industry integrator for wind power projects, not only made-up an efficient supply chain, but also contributed to the development of inter-divisional cooperation and new expertise of Rosatom enterprises. TVEL has mastered a unique technology for the production of magnets for wind turbine generators. These technologies will be undoubtedly in demand in other areas as well,” noted Alexander Korchagin, Director General of NovaWind JSC.

For reference:

TVEL Fuel Company of Rosatom incorporates enterprises for the fabrication of nuclear fuel, conversion and enrichment of uranium, production of gas centrifuges, as well as research and design organizations. It is the only supplier of nuclear fuel for Russian nuclear power plants. TVEL Fuel Company of Rosatom provides nuclear fuel for 73 power reactors in 13 countries worldwide, research reactors in eight countries, as well as transport reactors of the Russian nuclear fleet. Every sixth power reactor in the world operates on fuel manufactured by TVEL. www.tvel.ru

NovaWind JSC is a division of Rosatom; its primary objective is to consolidate the State Corporation's efforts in advanced segments and technological platforms of the electric power sector. The company was founded in 2017. NovaWind consolidates all of the Rosatom’s wind energy assets – from design and construction to power engineering and operation of wind farms.

Overall, by 2023, enterprises operating under the management of NovaWind JSC, will install 1 GW of wind farms. http://novawind.ru

Elemash Magnit LLC is a subsidiary of Kovrov Mechanical Plant (an enterprise of the TVEL Fuel Company of Rosatom) and its main supplier of magnets for production of gas centrifuges. The company also produces magnets for other industries, in particular, for the automotive

industry. The production facilities of Elemash Magnit LLC are located in the city of Elektrostal, Moscow Region, at the site of Elemash Machine-Building Plant (a nuclear fuel fabrication facility of TVEL Fuel Company).

Rosatom is a global actor on the world’s nuclear technology market. Its leading edge stems from a number of competitive strengths, one of which is assets and competences at hand in all nuclear segments. Rosatom incorporates companies from all stages of the technological chain, such as uranium mining and enrichment, nuclear fuel fabrication, equipment manufacture and engineering, operation of nuclear power plants, and management of spent nuclear fuel and nuclear waste. Nowadays, Rosatom brings together about 350 enterprises and organizations with the workforce above 250 K. https://rosatom.ru/en/

phantom hill ctf 1

MingYang Signs MoU for UK Manufacturing

phantom hill ctf 1

Vestas Sells Wind Project in Mississippi to AES Corporation

phantom hill ctf 1

Wind Energy Going Strong in Oklahoma

phantom hill ctf 1

U.S. Added Less New Wind Power in 2021 Than the Previous Year — Here’s Why

phantom hill ctf 1

Financial Close Attaind for Abydos Solar and Amunet Wind Power Projects in Egypt

phantom hill ctf 1

Vestas V236-15.0 MW Wind Turbines Ready for Testing?

Developing ash-free high-strength spherical carbon catalyst supports

  • Domestic Catalysts
  • Published: 28 June 2013
  • Volume 5 , pages 156–163, ( 2013 )
  • V. V. Gur’yanov 1 ,
  • V. M. Mukhin 1 &
  • A. A. Kurilkin 1  

48 Accesses

Explore all metrics

The possibility of using furfurol for the production of ash-free high-strength active carbons with spheroidal particles as adsorbents and catalyst supports is substantiated. A single-stage process that incorporates the resinification of furfurol, the molding of a spherical product, and its hardening while allowing the process cycle time and the cost of equipment to be reduced is developed. Derivatographic, X-ray diffraction, mercury porometric, and adsorption studies of the carbonization of the molded spherical product are performed to characterize the development of the primary and porous structures of carbon residues. Ash-free active carbons with spheroidal particles, a full volume of sorbing micro- and mesopores (up to 1.50 cm 3 /g), and a uniquely high mechanical strength (its abrasion rate is three orders of magnitude lower than that of industrial active carbons) are obtained via the vapor-gas activation of a carbonized product. The obtained active carbons are superior to all known foreign and domestic analogues and are promising for the production of catalysts that operate under severe regimes, i.e., in moving and fluidized beds.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Burushkina, T.N., Zh. Ross. Khim. O-va im. D.I. Mendeleeva , 1995, vol. 39, no. 6, p. 122.

CAS   Google Scholar  

Kryazhev, Yu. G., Abstract of Papers, Materialy XII vserossiiskogo simpoziuma s uchastiem inostrannykh uchenykh “Aktual’nye problemy teorii adsorptsii, poristosti i adsorptsionnoi selektivnosti” (Proc. of XII th All-Russia Symposium with the Participation of Foreign Scientists “Urgent Problems of the Theory of Adsorption, Porosity, and Adsorption Selectivity”), Moscow, 2008, p. 69.

Google Scholar  

Kartel’, N.T., in Adsorbtsiya, adsorbenty i adsorbtsionnye protsessy v nanoporistykh materialakh (Adsorption, Adsorbents, and Adsorption Processes in Nanoporous Materials), Tsivadze, A.Yu., Ed., Moscow: Granitsa, 2011, p. 381.

RF Patent 2026813, 1993.

RF Patent 2257343, 2003.

RF Patent 2301701, 2006.

Dubinin, M.M., Zaverina, E.D., Ivanova, L.S., Kaverov, A.T., and Kasatochkin, V.I., Rus. Chem. Bull. , 1961, vol. 10, no. 1, p. 14.

Article   Google Scholar  

Usenbaev, K. and Zhumalieva, K., Rentgenograficheskoe issledovanie struktury i termicheskikh preobrazovanii amorfnykh uglerodov (X-ray Study of the Structure and Thermal Transformations of Amorphous Carbons), Frunze: Mektep, 1976.

Gur’yanova, L.N. and Gur’yanov, V.V., Zh. Fiz. Khim. , 1984, vol. 58, no. 6, p. 1459; 1989, vol. 63, no. 1, p. 161; 1989, vol. 63, no. 2, p. 426; 1989, vol. 63, no. 3, p. 683.

Guryanov, V.V., Petukhova, G.A., and Dubinina, L.A., Prot. Metal. Phys. Chem. Surf. , 2010, vol. 46, no. 2, p. 191.

Article   CAS   Google Scholar  

Guryanov, V.V., Dubinin, M.M., and Misin, M.S., Zh. Fiz. Khim. , 1975, vol. 49, no. 9, p. 2374.

Gur’yanov, V.V., Petukhova, G.A., and Polyakov, N.S., Rus. Chem. Bull. , 2001, vol. 50, no. 6, p. 974.

Dubinin, M.M., Carbon , 1989, vol. 27, no. 3, p. 457.

Belyaev, N.M., Soprotivlenie materialov (Strength of Materials), Moscow: Nauka, 1976.

Temkin, I.V., Proizvodstvo elektrougol’nykh izdelii (Production of Electrocarbon Articles), Moscow: Vysshaya shkola, 1980.

Download references

Author information

Authors and affiliations.

OAO Elektrostal’ Research and Production Association Neorganika, Elektrostal’, Moscow oblast, 144001, Russia

V. V. Gur’yanov, V. M. Mukhin & A. A. Kurilkin

You can also search for this author in PubMed   Google Scholar

Additional information

Original Russian Text © V.V. Gur’yanov, V.M. Mukhin, A.A. Kurilkin, 2013, published in Kataliz v Promyshlennosti.

Rights and permissions

Reprints and permissions

About this article

Cite this article.

Gur’yanov, V.V., Mukhin, V.M. & Kurilkin, A.A. Developing ash-free high-strength spherical carbon catalyst supports. Catal. Ind. 5 , 156–163 (2013). https://doi.org/10.1134/S2070050413020062

Download citation

Received : 08 December 2011

Published : 28 June 2013

Issue Date : April 2013

DOI : https://doi.org/10.1134/S2070050413020062

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

  • carbon adsorbent
  • porous structure
  • polymerization
  • Find a journal
  • Publish with us
  • Track your research

phantom hill ctf 1

Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

If you've ever tried wearing modern night vision goggles, you'll understand why they're often described as a superpower. Although it's not quite as impressive as flying like a speeding bullet or lifting a semi truck, the ability to see clearly, identify targets, and shoot accurately in a nearly-pitch-black environment feels like an unfair advantage. However, like most superpowers, night vision comes with some inherent drawbacks. It requires a substantial amount of gear — for starters, you'll need a helmet, shroud, mount, and goggles or a monocular. The cost for these items adds up quickly and can easily exceed $5,000 or $10,000, and that's before you consider common accessories like helmet-mounted lights, strobes, battery packs, and ear protection. Refer to OFFGRID Issue 43 for several in-depth articles explaining the basics of helmets and night vision systems.

Once you've done your research and chosen a night vision setup, the next item you'll need is a weapon-mounted infrared (IR) laser and illuminator.

The Challenges of Traditional Lights, Lasers, and Illuminators

whitelight

Above: OFFGRID editor Tom Marshall wrote about two rifles he configured with traditional light/laser/illuminator setups. The first, seen here, features a Steiner DBAL-I2 IR laser flanked by a SureFire Scout light with Vampire head that can switch between IR and white light settings.

Since IR light isn't visible to the naked eye, an IR laser and illuminator acts as a light source and aiming point that only you (and anyone else in the area wearing NVGs) can see. Typically, this will be paired with a separate weapon-mounted white light, which can be used in low-light and transitional environments where night vision isn't required. If you're thinking that this sounds expensive, you're not wrong. It's easy to spend another $1,500 or more on a multi-function IR laser/illuminator unit such as a Steiner DBAL or L3-Harris ATPIAL-C, plus $300 or more on a quality white light.

whitelight

Above: Tom Marshall's second rifle features a Holosun IR laser/illuminator and a white light that incorporates parts from Cloud Defensive and Valhalla Tactical. A pair of remote switches allow activation of each device.

As if that's not enough, you'll still have to figure out how to mount your white light and IR laser/illuminator onto your rifle. Depending on each device's positioning and how much rail space you have to work with, you may need to add remote switches and route their wires carefully to keep your setup organized. That's another rabbit hole full of multi-function switches, mounting adapters, and wire-routing accessories that add to the total cost of your setup.

Once you've spent the time and money to configure a rifle with a traditional light/laser/illuminator setup, the results are certainly rewarding. But for newcomers to the world of night vision, this cost and complexity can be discouraging. It has often left us wondering why there isn't a simpler and more affordable “turn-key” option on the market — Phantom Hill set out to provide exactly that.

Phantom Hill CTF-1: An All-in-One Solution

whitelight

You probably haven't heard of Phantom Hill — neither had we — but that doesn't mean it's a newcomer to this market. Phantom Hill has spent the last 14 years designing night vision equipment behind the scenes for some of the biggest players in the industry: Ops-Core, Gentex, S&S Precision, Princeton Tec, and Crye Precision, to name a few. Only recently did the company decide to launch its first product under its own brand name.

The Phantom Hill CTF-1 is described as “a simple tool at a fair price that can be put to immediate use without the need for additional components.” The MSRP for this unit is $799, a price that's roughly half that of the multi-function IR laser/illuminators we mentioned earlier, not to mention the extra cost of a separate white light. This caught our attention, so we requested a sample to review shortly after it was released in late 2021.

whitelight

Above: Our sample is marked as serial number 12, indicating just how “hot off the press” it was.

Design and Functionality

The CTF-1 covers all three of the most important functions — white light, infrared laser, and infrared illuminator — in a single compact unit.

thephantom

Above: We mounted the CTF-1 on this Aero Precision EPC 9mm AR pistol, which will be featured in a separate article soon. It features parts from Arbor Arms, Arisaka Defense, JK Armament, Primary Arms, RISE Armament, Strike Industries. (Photo by Nate Gerhart)

At its core is a metal housing with an unusual-looking raw finish. This characteristic comes from its Direct Metal Laser Sintered (DMLS) aluminum construction. DMLS is a 3D-printing technique that uses a laser to sinter (i.e. heat and condense) metal powder into a solid structure. This technology allowed Phantom Hill to move quickly from a prototype phase to a production-ready design, while avoiding expensive tooling or molds that would drive up production costs. Phantom Hill says the rough sintered finish has a secondary advantage — it reduces the IR reflectivity of the unit, therefore making it less visible to other NV-equipped personnel.

The housing has an integrated Rail Grabber that locks onto a Picatinny rail using a single cross-bolt with a Torx head. We found this mounting system to be very secure. It fit three ARs we tried it on, but we suspect that its tight contours around the top rail may make it incompatible with certain large-diameter handguards. Compatibility with non-AR platforms will be hit or miss at best.

postreview

The Phantom Hill CTF-1 uses a symmetrical design with a white light on one side and an IR illuminator on the other. The white LED produces 380 lumens of neutral 5700K light and projects it in a soft flood pattern. This is ideal for close-quarters use and room-clearing, since it offers a wide angle of visibility, but it doesn't have the power or throw necessary for long-range shots outdoors. If you've used a Streamlight TLR-7 pistol light, it's comparable to that.

As for the IR illuminator, its beam pattern is essentially the same as the white LED. For those who like the technical details, it features an 850nm wavelength and 1120 mW/sr output; for the rest of us, it appears roughly as bright under a set of NV tubes as the white light looks to the naked eye.

The IR illuminator activates simultaneously with the 850nm IR laser, which is centered directly over the bore of the weapon. We won't say that all IR lasers are created equal, but civilian-legal Class 1 IR lasers are limited by the U.S. Food and Drug Administration (yes, the FDA regulates lasers) to a maximum output less than 0.70mW. As a result, most high-quality civilian-legal IR lasers will be calibrated to just below this limit, and will appear similarly bright under normal use.

whitelight

Activation is simple, with two textured rubber buttons on top of the unit. Each corresponds to its side of the housing; the left “VIS” button activates the white light, and the right “IR” button activates the IR illuminator and IR laser. Both are momentary-only, so you'll need to press and hold to keep the power on.

Unlike many multi-function laser units, the CTF-1 does not have a visible laser built in. This keeps cost and complexity down, but also means you'll only be able to zero the laser under night vision. If both activation buttons are pressed and held for 3 seconds, the unit goes into zeroing mode, and the IR laser turns on continuously. It can then be adjusted via elevation and windage hex screws to match the weapon's point of impact. Thankfully, its centered alignment meant we didn't have to do much adjustment after mounting it on our Aero Precision EPC 9mm AR.

whitelight

The CTF-1 is powered by two CR123 batteries, each sealed behind separate weatherproof caps at the back of the housing. Phantom Hill says the caps have a taper-fit design to make it easier to reinstall them in the dark. Maximum run time is advertised at 3 hours.

Impressions at the Range

We tested the Phantom Hill CTF-1 IR laser and illuminator side-by-side against an AN/PEQ-15, which is the full-power military-spec version of an L3-Harris ATPIAL-C. The full-power PEQ-15 is not available on the civilian market, but a new ATPIAL-C will run you approximately $1,350 — that's $550 more than the CTF-1. It doesn't include a white light, so factor in a few hundred more for that if you don't already have one.

postreview

Above: This image, taken through an AGM Global Vision white phosphor PVS-14, shows the CTF-1 IR laser and illuminator aimed at a berm approximately 25 yards away. The only ambient lighting was some dim moonlight. 

whitelight

Above: These photos show the CTF-1 beam next to a PEQ-15 in “low” mode (left photo) and “high” mode (right photo).

With the PEQ-15 on its civilian-legal “low” setting, the lasers appear identical, as we expected. The CTF's illuminator appears far brighter than the PEQ's, but the PEQ's adjustable focus lens produces a much more concentrated beam with a hard edge. At distances closer than 100 yards, we'd give the CTF-1 an advantage, especially in enclosed spaces. Beyond 100 yards, the PEQ's concentrated beam is superior.

With the PEQ-15 on the “high” setting, it definitely outperforms the CTF-1, especially considering its ability to adjust the beam focus for varying distances. The laser is also noticeably brighter, drawing a line that highlights dust particles in the air. However, this output mode is not accessible to commercial ATPIAL-C units. Full-power PEQ-15s are only available to the military and law enforcement agencies, so it's not a fair comparison. We included it as a point of reference, since the CTF-1 still performed surprisingly well in comparison.

Closing Thoughts

postreview

There are a few drawbacks to the CTF-1. The centered laser makes it impossible to mount backup iron sights in front of the unit or use it on anything with a fixed front sight. The housing is tightly-contoured around the rail, which may make the unit incompatible with certain handguards (e.g. integrally-suppressed guns). The activation buttons are placed close together with identical size and texture, so despite the small ridge between them, it's relatively easy to fat-finger the wrong one. And the lack of a visible laser makes zeroing more of a challenge.

That said, the Phantom Hill CTF-1 offers impressive value at $800, and absolutely fulfills its stated goal of serving as “a simple tool at a fair price that can be put to immediate use.” We found that it works especially well for short weapons with limited handguard real estate, since there's no need for a separate white light, switches, or cable routing. The wide beam pattern for IR and VIS outputs also lends itself to these applications. Whether you're just getting started in the world of night vision or you're looking for a more convenient way to convert one of your ARs for NV use, the CTF-1 is an appealing option, and we're glad to see this market becoming more diverse.

postreview

We'll leave you with a piece of good news. Phantom Hill has announced a second product called the CTF-2, which will feature an updated 3-button activation system and compatibility with SureFire-style light and illuminator heads (e.g. a SureFire Scout light and a B.E. Meyers KIJI illuminator). Phantom Hill expects to launch this product around mid-2022.

For more information on the Phantom Hill CTF-1 and future Phantom Hill products, go to phantomhill.design or follow @phantomhill.design on Instagram.

Related Posts

whitelight

The post Review: Phantom Hill CTF-1 Infrared Laser and Illuminator appeared first on RECOIL OFFGRID.

By: Patrick McCarthy Title: Review: Phantom Hill CTF-1 Infrared Laser and Illuminator Sourced From: www.offgridweb.com/gear/review-phantom-hill-ctf-1-infrared-laser-and-illuminator/ Published Date: Sun, 27 Mar 2022 19:39:55 +0000

-------------------------------------------------------------------------

Latest Posts

Pacific Angler Friday Fishing Report: January 5, 2024

Pacific Angler Friday Fishing Report: January 5, 2024

Tips for Winter Fly Fishing

Tips for Winter Fly Fishing

Christmas

A Christmas Fly Rod for Sandy

Sørøya

Fly Fishing for Halibut in Sørøya

What Do All the Billionaires Know That Has Them Prepping for Doomsday?

What Do All the Billionaires Know That Has Them Prepping for Doomsday?

vintage

VINTAGE TROUTS - "Catch and Re-Wear"

  • Camping (993)
  • Survivalist (1776)
  • Hunting (18)
  • Fishing (169)
  • Exploring (19)
  • Hiking (56)

Trending Posts

Outdoors trend: winter camping is heating up, are tasers legal in iowa what you should know.

BestSurvivalSkills.com

Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

If you’ve ever tried wearing modern night vision goggles, you’ll understand why they’re often described as a superpower. Although it’s not quite as impressive as flying like a speeding bullet or lifting a semi truck, the ability to see clearly, identify targets, and shoot accurately in a nearly-pitch-black environment feels like an unfair advantage. However, like most superpowers, night vision comes with some inherent drawbacks. It requires a substantial amount of gear — for starters, you’ll need a helmet, shroud, mount, and goggles or a monocular. The cost for these items adds up quickly and can easily exceed $5,000 or $10,000, and that’s before you consider common accessories like helmet-mounted lights, strobes, battery packs, and ear protection. Refer to OFFGRID Issue 43 for several in-depth articles explaining the basics of helmets and night vision systems.

Once you’ve done your research and chosen a night vision setup, the next item you’ll need is a weapon-mounted infrared (IR) laser and illuminator.

The Challenges of Traditional Lights, Lasers, and Illuminators

phantom hill ctf 1

Above: OFFGRID editor Tom Marshall wrote about two rifles he configured with traditional light/laser/illuminator setups. The first, seen here, features a Steiner DBAL-I2 IR laser flanked by a SureFire Scout light with Vampire head that can switch between IR and white light settings.

phantom hill ctf 1

Subscribe Today and Save!

Since IR light isn’t visible to the naked eye, an IR laser and illuminator acts as a light source and aiming point that only you (and anyone else in the area wearing NVGs) can see. Typically, this will be paired with a separate weapon-mounted white light, which can be used in low-light and transitional environments where night vision isn’t required. If you’re thinking that this sounds expensive, you’re not wrong. It’s easy to spend another $1,500 or more on a multi-function IR laser/illuminator unit such as a Steiner DBAL or L3-Harris ATPIAL-C, plus $300 or more on a quality white light.

phantom hill ctf 1

Above: Tom Marshall’s second rifle features a Holosun IR laser/illuminator and a white light that incorporates parts from Cloud Defensive and Valhalla Tactical. A pair of remote switches allow activation of each device.

As if that’s not enough, you’ll still have to figure out how to mount your white light and IR laser/illuminator onto your rifle. Depending on each device’s positioning and how much rail space you have to work with, you may need to add remote switches and route their wires carefully to keep your setup organized. That’s another rabbit hole full of multi-function switches, mounting adapters, and wire-routing accessories that add to the total cost of your setup.

Once you’ve spent the time and money to configure a rifle with a traditional light/laser/illuminator setup, the results are certainly rewarding. But for newcomers to the world of night vision, this cost and complexity can be discouraging. It has often left us wondering why there isn’t a simpler and more affordable “turn-key” option on the market — Phantom Hill set out to provide exactly that.

Phantom Hill CTF-1: An All-in-One Solution

phantom hill ctf 1

You probably haven’t heard of Phantom Hill — neither had we — but that doesn’t mean it’s a newcomer to this market. Phantom Hill has spent the last 14 years designing night vision equipment behind the scenes for some of the biggest players in the industry: Ops-Core, Gentex, S&S Precision, Princeton Tec, and Crye Precision, to name a few. Only recently did the company decide to launch its first product under its own brand name.

The Phantom Hill CTF-1 is described as “a simple tool at a fair price that can be put to immediate use without the need for additional components.” The MSRP for this unit is $799, a price that’s roughly half that of the multi-function IR laser/illuminators we mentioned earlier, not to mention the extra cost of a separate white light. This caught our attention, so we requested a sample to review shortly after it was released in late 2021.

phantom hill ctf 1

Above: Our sample is marked as serial number 12, indicating just how “hot off the press” it was.

Design and Functionality

The CTF-1 covers all three of the most important functions — white light, infrared laser, and infrared illuminator — in a single compact unit.

phantom hill ctf 1

Above: We mounted the CTF-1 on this Aero Precision EPC 9mm AR pistol, which will be featured in a separate article soon. It features parts from Arbor Arms, Arisaka Defense, JK Armament, Primary Arms, RISE Armament, Strike Industries. (Photo by Nate Gerhart)

At its core is a metal housing with an unusual-looking raw finish. This characteristic comes from its Direct Metal Laser Sintered (DMLS) aluminum construction. DMLS is a 3D-printing technique that uses a laser to sinter (i.e. heat and condense) metal powder into a solid structure. This technology allowed Phantom Hill to move quickly from a prototype phase to a production-ready design, while avoiding expensive tooling or molds that would drive up production costs. Phantom Hill says the rough sintered finish has a secondary advantage — it reduces the IR reflectivity of the unit, therefore making it less visible to other NV-equipped personnel.

The housing has an integrated Rail Grabber that locks onto a Picatinny rail using a single cross-bolt with a Torx head. We found this mounting system to be very secure. It fit three ARs we tried it on, but we suspect that its tight contours around the top rail may make it incompatible with certain large-diameter handguards. Compatibility with non-AR platforms will be hit or miss at best.

phantom hill ctf 1

The Phantom Hill CTF-1 uses a symmetrical design with a white light on one side and an IR illuminator on the other. The white LED produces 380 lumens of neutral 5700K light and projects it in a soft flood pattern. This is ideal for close-quarters use and room-clearing, since it offers a wide angle of visibility, but it doesn’t have the power or throw necessary for long-range shots outdoors. If you’ve used a Streamlight TLR-7 pistol light, it’s comparable to that.

As for the IR illuminator, its beam pattern is essentially the same as the white LED. For those who like the technical details, it features an 850nm wavelength and 1120 mW/sr output; for the rest of us, it appears roughly as bright under a set of NV tubes as the white light looks to the naked eye.

The IR illuminator activates simultaneously with the 850nm IR laser, which is centered directly over the bore of the weapon. We won’t say that all IR lasers are created equal, but civilian-legal Class 1 IR lasers are limited by the U.S. Food and Drug Administration (yes, the FDA regulates lasers) to a maximum output less than 0.70mW. As a result, most high-quality civilian-legal IR lasers will be calibrated to just below this limit, and will appear similarly bright under normal use.

phantom hill ctf 1

Activation is simple, with two textured rubber buttons on top of the unit. Each corresponds to its side of the housing; the left “VIS” button activates the white light, and the right “IR” button activates the IR illuminator and IR laser. Both are momentary-only, so you’ll need to press and hold to keep the power on.

Unlike many multi-function laser units, the CTF-1 does not have a visible laser built in. This keeps cost and complexity down, but also means you’ll only be able to zero the laser under night vision. If both activation buttons are pressed and held for 3 seconds, the unit goes into zeroing mode, and the IR laser turns on continuously. It can then be adjusted via elevation and windage hex screws to match the weapon’s point of impact. Thankfully, its centered alignment meant we didn’t have to do much adjustment after mounting it on our Aero Precision EPC 9mm AR.

phantom hill ctf 1

The CTF-1 is powered by two CR123 batteries, each sealed behind separate weatherproof caps at the back of the housing. Phantom Hill says the caps have a taper-fit design to make it easier to reinstall them in the dark. Maximum run time is advertised at 3 hours.

Impressions at the Range

We tested the Phantom Hill CTF-1 IR laser and illuminator side-by-side against an AN/PEQ-15, which is the full-power military-spec version of an L3-Harris ATPIAL-C. The full-power PEQ-15 is not available on the civilian market, but a new ATPIAL-C will run you approximately $1,350 — that’s $550 more than the CTF-1. It doesn’t include a white light, so factor in a few hundred more for that if you don’t already have one.

phantom hill ctf 1

Above: This image, taken through an AGM Global Vision white phosphor PVS-14, shows the CTF-1 IR laser and illuminator aimed at a berm approximately 25 yards away. The only ambient lighting was some dim moonlight. 

phantom hill ctf 1

Above: These photos show the CTF-1 beam next to a PEQ-15 in “low” mode (left photo) and “high” mode (right photo).

With the PEQ-15 on its civilian-legal “low” setting, the lasers appear identical, as we expected. The CTF’s illuminator appears far brighter than the PEQ’s, but the PEQ’s adjustable focus lens produces a much more concentrated beam with a hard edge. At distances closer than 100 yards, we’d give the CTF-1 an advantage, especially in enclosed spaces. Beyond 100 yards, the PEQ’s concentrated beam is superior.

With the PEQ-15 on the “high” setting, it definitely outperforms the CTF-1, especially considering its ability to adjust the beam focus for varying distances. The laser is also noticeably brighter, drawing a line that highlights dust particles in the air. However, this output mode is not accessible to commercial ATPIAL-C units. Full-power PEQ-15s are only available to the military and law enforcement agencies, so it’s not a fair comparison. We included it as a point of reference, since the CTF-1 still performed surprisingly well in comparison.

Closing Thoughts

phantom hill ctf 1

There are a few drawbacks to the CTF-1. The centered laser makes it impossible to mount backup iron sights in front of the unit or use it on anything with a fixed front sight. The housing is tightly-contoured around the rail, which may make the unit incompatible with certain handguards (e.g. integrally-suppressed guns). The activation buttons are placed close together with identical size and texture, so despite the small ridge between them, it’s relatively easy to fat-finger the wrong one. And the lack of a visible laser makes zeroing more of a challenge.

That said, the Phantom Hill CTF-1 offers impressive value at $800, and absolutely fulfills its stated goal of serving as “a simple tool at a fair price that can be put to immediate use.” We found that it works especially well for short weapons with limited handguard real estate, since there’s no need for a separate white light, switches, or cable routing. The wide beam pattern for IR and VIS outputs also lends itself to these applications. Whether you’re just getting started in the world of night vision or you’re looking for a more convenient way to convert one of your ARs for NV use, the CTF-1 is an appealing option, and we’re glad to see this market becoming more diverse.

phantom hill ctf 1

We’ll leave you with a piece of good news. Phantom Hill has announced a second product called the CTF-2, which will feature an updated 3-button activation system and compatibility with SureFire-style light and illuminator heads (e.g. a SureFire Scout light and a B.E. Meyers KIJI illuminator). Phantom Hill expects to launch this product around mid-2022.

For more information on the Phantom Hill CTF-1 and future Phantom Hill products, go to phantomhill.design or follow @phantomhill.design on Instagram.

STAY SAFE: Download a Free copy of the OFFGRID Outbreak Issue

In issue 12, Offgrid Magazine took a hard look at what you should be aware of in the event of a viral outbreak. We’re now offering a free digital copy of the OffGrid Outbreak issue when you subscribe to the OffGrid email newsletter. Sign up and get your free digital copy Click to Download!

phantom hill ctf 1

New: Bushnell BackTrack Mini GPS Unit

Self-defense lessons with a former cia agent | rachael ray show, related articles.

phantom hill ctf 1

IMAGES

  1. Phantom Hill Designs CTF-1: Redefining Entry Level IR Lasers

    phantom hill ctf 1

  2. Friday Night Lights: Phantom Hill CTF-1 MFAL -The Firearm Blog

    phantom hill ctf 1

  3. Friday Night Lights: Phantom Hill CTF-1 MFAL -The Firearm Blog

    phantom hill ctf 1

  4. [SHOT 2022] Phantom Hill CTF2

    phantom hill ctf 1

  5. Phantom Hill Designs CTF-1: Redefining Entry Level IR Lasers

    phantom hill ctf 1

  6. [SHOT 2022] Phantom Hill CTF2

    phantom hill ctf 1

VIDEO

  1. [100% LTE] 신동엽의 '불났어요'

  2. ERA VOCÊ.. WILLIAM NASCIMENTO

  3. BMW 335i F30 M-Performance Parts

  4. Coldplay

  5. Robert Fuller

  6. Why Society HATES Single Men

COMMENTS

  1. Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

    The Phantom Hill CTF-1 uses a symmetrical design with a white light on one side and an IR illuminator on the other. The white LED produces 380 lumens of neutral 5700K light and projects it in a soft flood pattern. This is ideal for close-quarters use and room-clearing, since it offers a wide angle of visibility, but it doesn't have the power or ...

  2. INDUSTRIAL DESIGN

    INDUSTRIAL DESIGN | Phantom Hill THE CTF2 The CTF2 architecture is modular. You can buy a CTF2 base and install illuminators to fit your needs. Use heads you already own, or buy new ones that fit your budget. The CTF2 will be offered in bundle packages with both IR and white light options. LEARN MORE

  3. Friday Night Lights: Phantom Hill CTF-1 MFAL

    The CTF-1 has an infrared aiming laser and offset IR illuminator as well as an offset white light all in one unit. How much is the CTF-1? It is just $800, well below other civilian laser offerings.

  4. Phantom Hill Designs CTF-1: Redefining Entry Level IR Lasers

    The Phantom Hill designs CTF-1 is not trying to replace the PEQ-15, nor undercut the DBAL, but provide a functional system that solves multiple needs. It aims to outperform pistol-style designators, without costing the $1,500 of a typical civilian laser. Does it accomplish this? Technically yes.

  5. Phantom Hill CTF-1 Review: The IR Laser for the Rest of Us

    The Phantom Hill CTF-1 is a civilian market oriented multi function aiming laser device, with a pair of LED based illuminators; one white and one IR. The LED...

  6. New: Phantom Hill CTF-2 IR Laser/Illuminator Details Revealed

    The Phantom Hill CTF-1, which we previously reviewed, includes an infrared laser, IR illuminator, and white light in a single housing for $800 — that's relatively inexpensive compared to existing options like the DBAL or ATPIAL-C.

  7. Phantom Hill CTF-1

    Phantom Hill CTF-1 - IR Emitter Demo - Details in comments 44 comments Add a Comment LittleHorseBrother • 2 yr. ago • Edited 2 yr. ago Folks have been asking about the effective range of our CTF-1 emitters. Hopefully this video gives you an idea of how far they can reach.

  8. Phantom Hill Designs CTF-1: Redefining Entry Level IR Lasers

    By incorporating a visible/white light, IR laser, and IR illuminator into a single housing, all for under $800, the CTF-1 looks like it could redefine what a true entry-level night vision setup would look like. Cerberus, but with Two Heads. At the end of the day, there's no truly casual way to get into night vision.

  9. Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

    If you've ever tried wearing modern night vision goggles, you'll understand why they're often described as a superpower. Although it's not quite as impressive a

  10. Phantom Hill // CTF-1

    Phantom Hill // CTF-1 Phantom Hill 286 subscribers 6.9K views 1 year ago To learn more, please visit our website at www.phantomhill.design We reimagined cable. Try it free.* Live TV from...

  11. PHANTOM HILL CTF-1

    PHANTOM HILL CTF-1 OFFGRID | Issue 50 White Light, IR Laser, and IR Illuminator in a Compact and (Relatively) Inexpensive Package- . Patrick McCarthy. If you've ever tried wearing modern night vision goggles, you'll understand why they're often described as a superpower.Although it's not quite as impressive as flying like a speeding bullet or lifting a semitruck, the ability to see clearly ...

  12. Friday Night Lights: Phantom Hill CTF2

    The original CTF-1 was well received and Phantom Hill quickly sold out of them. However, people wanted more from Phantom Hill and they heeded the call for a modular Multi-Function Aiming Laser (MFAL). They made the CTF2 modular so it can take SureFire-compatible heads. Specifically, 3v M300 style heads.

  13. Phantom Hill CTF-1 vs Surefire Vampire

    Phantom Hill CTF-1 tested against the DBAL I2 9007, and the Steiner OTAL-C IR with a Surefire M600 Vampire (KM2-C).Being a civilian ain't easy.

  14. New Laser Modules by Phantom Hill

    Specs: https://www.phantomhill.design/ $799 Posted: 10/1/2021 1:18:33 PM EST [#1] The weight and form factor already make it more interesting than the Steiner D2 I would be up for trying it out Placement of white and IR right next to eachother is a little sketchy.

  15. Overview: Phantom Hill CTF-1 Infrared Laser and Illuminator

    The Phantom Hill CTF-1 makes use of a symmetrical design with a white mild on one aspect and an IR illuminator on the opposite. The white LED produces 380 lumens of impartial 5700K mild and tasks it in a smooth flood sample. That is splendid for close-quarters use and room-clearing, because it gives a large angle of visibility, but it surely ...

  16. Phantom Hill Designs CTF-1: Redefining Entry Level IR Lasers

    Every day, behind the veil of bureaucracy, super-secret scientists invent new lights, lasers, and technology that could cause armageddon if it were to get into

  17. Rosatom Starts Production of Rare-Earth Magnets for Wind Power

    06 Nov 2020 by Rosatom. TVEL Fuel Company of Rosatom has started gradual localization of rare-earth magnets manufacturing for wind power plants generators. The first sets of magnets have been manufactured and shipped to the customer. In total, the contract between Elemash Magnit LLC (an enterprise of TVEL Fuel Company of Rosatom in Elektrostal ...

  18. Developing ash-free high-strength spherical carbon catalyst supports

    The possibility of using furfurol for the production of ash-free high-strength active carbons with spheroidal particles as adsorbents and catalyst supports is substantiated. A single-stage process that incorporates the resinification of furfurol, the molding of a spherical product, and its hardening while allowing the process cycle time and the ...

  19. Arsenal 4-1 CSKA Moscow

    ArsenalFanTV are backed for the season by Ladbrokes. To boost your odds this weekend, BET HERE: http://po.st/AFTV_BoostNEW CUSTOMER OFFER - UP TO £50 MATCHED...

  20. Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

    Phantom Hill CTF-1: An All-in-One Solution. You probably haven't heard of Phantom Hill — neither had we — but that doesn't mean it's a newcomer to this market. Phantom Hill has spent the last 14 years designing night vision equipment behind the scenes for some of the biggest players in the industry: Ops-Core, Gentex, S&S Precision ...

  21. Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

    Review: Phantom Hill CTF-1 Infrared Laser and Illuminator. admin March 25, 2022. 8 minutes read. If you've ever tried wearing modern night vision goggles, you'll understand why they're often described as a superpower. Although it's not quite as impressive as flying like a speeding bullet or lifting a semi truck, the ability to see ...

  22. Review: Phantom Hill CTF-1 Infrared Laser and Illuminator

    Review: Phantom Hill CTF-1 Infrared Laser and Illuminator. admin April 6, 2022. 8 minutes read. If you've ever tried wearing modern night vision goggles, you'll understand why they're often described as a superpower. Although it's not quite as impressive as flying like a speeding bullet or lifting a semi truck, the ability to see ...

  23. MAHLER: Symphony No. 1 in D major "Titan" / Kondrashin

    I. Langsam. Schleppen. (Wie ein Nacturland) Im Anfang sehrgemachlich 12:30II. Kraftig bewegt, doch nicht zu schnell; Trio. Recht gemachlich ...